BPF 2016-2023 Toyota Tacoma Tailgate Panel
Turn your 2016–2023 Toyota Tacoma tailgate into a flat, sturdy workspace with lockable storage for recovery gear and trail essentials. The BPF tailgate storage panel replaces the factory inner tailgate panel with a precision CNC laser-cut 1/8-inch aluminum panel. It uses otherwise unused tailgate space without taking up room in your truck bed.
Why Choose the BPF Tacoma Tailgate Storage Panel?
- No cutting or drilling: Direct bolt-on installation using existing factory mounting locations and hardware.
- Lockable tailgate storage: Two keyed paddle latches help keep soft shackles, tow straps, tools and camping essentials organized.
- Lightweight aluminum: CNC laser-cut 1/8-inch aluminum panel weighing approximately 11 lbs.
- Flat, sturdy work surface: Useful for organizing equipment and campsite tasks; the panel is strong enough to stand on when properly installed and supported.
- Raw aluminum finish: Install as supplied or finish with your preferred paint or coating. Painted panels in photos are examples.
- 3rd Gen Tacoma fitment: Designed specifically for 2016–2023 Toyota Tacoma models.
Make Better Use of Your Tailgate
The hinged panel opens to access storage inside the tailgate and closes with two lockable paddle latches. Keep appropriately sized recovery gear and other essentials close at hand, with a practical flat surface for working or organizing gear on the trail. For food preparation, use a separate food-safe cutting board or tray; the panel is not represented as safe for direct food contact.
Current lead time: 2–4 weeks.
Ships raw aluminum, unpainted. Shipping is calculated at checkout, starting at $50.
Product Specifications
- Fitment: 2016–2023 Toyota Tacoma (3rd Generation)
- Material: 1/8-inch aluminum, CNC laser cut
- Weight: Approximately 11 lbs
- Finish: Raw, unpainted aluminum
- Installation: Bolt-on, using factory mounting hardware; no cutting or drilling
- Access: Hinged panel with two keyed paddle latches
What's Included
- Aluminum tailgate panel with hinge pre-installed
- Two black powder-coated lockable paddle latches with keys
Installation reuses your factory mounting hardware.
Have a 2005–2015 Tacoma? See our 2nd Gen Tacoma tailgate storage panel for the correct fitment.
Installation Guide
Remove the factory inner tailgate panel and install the BPF replacement using the existing mounting locations. No cutting, drilling or permanent modifications are required. Watch the installation video below; the 2005–2015 and 2016–2023 panels follow the same general process.
Frequently Asked Questions
Does the BPF tailgate panel require cutting or drilling?
No. It replaces the factory inner panel and uses the existing mounting locations and factory hardware. No cutting, drilling or permanent modifications are required.
Will it fit a 2024 or newer Tacoma?
No. This version is for 2016–2023 Tacoma models. The 2024 and newer Tacoma uses a different tailgate design.
Is the panel aluminum or steel?
It is CNC laser-cut from 1/8-inch aluminum and weighs approximately 11 lbs.
Can I store recovery gear inside the tailgate?
Yes. The compartment can organize appropriately sized soft shackles, tow straps and other trail essentials.
Is the panel powder coated?
No. It ships in raw aluminum. Some product photos show customer or demonstration panels with painted finishes.
Can I stand on the panel?
The panel is described as strong enough to stand on when properly installed and supported. Use care and check that the panel and latches are secure.
Where can I find installation instructions?
Watch the video embedded above or visit our Installation Guides & Videos page. Some older videos or customer installations may show earlier hardware arrangements; contact BPF if your panel differs.
Returns accepted within 14 days of delivery for unused items in their original condition. A 10% restocking fee applies unless the return is due to our error. Customers are responsible for return shipping.
Order cancellations incur a 5% fee. See our full policy for exclusions.
- 5 stars: 12 (75%)
- 4 stars: 3 (19%)
- 3 stars: 0 (0%)
- 2 stars: 1 (6%)
- 1 star: 0 (0%)
I got my tailgate panel a few weeks earlier than expected which is always nice. I dropped it off at my local Rhino Liner dealer for a coating. Got it back today. Install took about 10 minutes, from start to finish. Love this thing. The only reason I can't give it a Five-star rating is that the panel doors seems to have a slight warp in that when I close it, the left and right sides seem to pop up from the edge. It isn't from the coating because I can actually push them down. To be clear, this isn't something that is going to sink the Titanic. It is just a little off. Other than that, I can't wait to pack it up.
Product is awesome. Installation was easy. Fitment is perfect.
Fits perfectly. Installation was easy.
great product
Great product! Shipping was a hassle but once it arrived it was a direct fit and only took a few minutes to install
Great product! Shipping was a hassle but once it arrived it was a direct fit and only took a few minutes to install
Perfect I love the new storage so great it’s like it’s OEM
This is a direct fit replacement for the ribbed plastic inner tailgate panel. I used truck bed paint to match the black color of the old panel and added weather-stripping under the door panel to minimize water intrusion. Neither are necessary, though. I believe these panels initially required you to drill holes for the hinge screws, but the one I received was nicely flat and required no drilling. Very happy :-).
Would have preferred if it came painted. Wasn't difficult and don't mind painting it myself. Just had a really hard time crunch and I needed this installed before leaving for vacation.
The extra room is amazing!
Quality is not great, they didn’t put rivets in every hole and the rivets they did use are starting to separate. But the product is a super good idea.
A quality product that is very easy to install. Looks and works just great. I would recommend this product to others.
Great and easy mod for the Tacoma. Now I'm able to store all my air-up/down gear (hoses, etc.) + assorted tie-down straps inside the tailgate for easy access. Very well built, and a bonus that it locks. Love it and would highly recommend!
Great and easy mod for the Tacoma. Now I'm able to store all my air-up/down gear (hoses, etc.) + assorted tie-down straps inside the tailgate for easy access. Very well built, and a bonus that it locks. Love it and would highly recommend!
Nice product.
great fit (you don't have to drill every recess hole like youtube shows.) high quality. Only small area for improvement is if you don't keep the latches locked they tend to pop open easily. All my ratchet straps and bungee cords are now stored in the tail gate.....very happy
